You're currently on:

AMS4-1AAM Three Quarter

Double click on above image to view full picture

Zoom Out
Zoom In
SKU: AMS4-1AAM

[AMS4-1AAM] Audio Monitoring System - 4 Stereo Analog In, 4 AES/EBU In (75 & 110 Ohm) & Dual Input 3G/HD/SD SDI Demuxer 1RU

Special Price US$1,995.00

Availability: Temporarily Out of Stock - Email sales@ward-beck.com, or call 416-335-5999, to order.

Details

The AMS4-1AAM is a versatile audio monitoring system. This 1RU high unit can be used to monitor analog audio and AES digital audio. The AMS4-1AAM features an 8 x 1 input switcher (four analog sources, four AES sources) with auto recognition of 75 or 110 Ohm AES signals The AMS4-1AAM also includes a dual input, 3G demuxer capable of extracting all eight AES embedded signals from the SDI stream. A direct balanced stereo analog audio output of the switcher is available on the rear panel. A ten segment LED stereo VU meter and phase indicator is included on the front panel.

The AMS4-1AAM offers full range acoustic monitoring and may be muted via external control. Two front panel push button switches, MODE and SOURCE, and a dot matrix LED readout allows the user to select the source to be monitored. The MODE switch steps through analog, AES and SDI modes while the SOURCE switch selects the input from the selected group. Use A1 through A4 for analog, D1 through D4 for AES and S1 through S8 for embedded signals. On power down, the last selection is stored in memory. If a signal is lost or corrupted in the AES or SDI digital modes, the display will alternate between the source selection and the letters NL, signifying no lock. The AMS4-1AAM will automatically detect whether the AES/EBU digital signal is balanced (110 Ohms) or unbalanced (75 Ohms). In the event that both a balanced and unbalanced signal is connected simultaneously to the same AES input, random selection between the two sources will occur. A convenient front panel mounted TRS headset jack is provided. The speaker feeds are normalled through this jack to automatically mute the speakers when a headset is plugged in.

Connections to the AMS4-1AAM are made on convenient pluggable screw terminals for the balanced analog and digital AES inputs and outputs. The unbalanced digital audio inputs are made on 75 Ohm BNC connectors. The EXT MUTE IN requires a closure to ground to mute the monitor. Once muted, the display window of the AMS4-1AAM will alternate between the selected source ID and the word MUTE. The open collector output EXT MUTE TALLY pin will be activated. Connections to the external mute control and tally are available on a pluggable screw terminal, located on the rear panel.

Details

  • • Monitors analog and AES signals
  • • 8 x1 Input Switcher, 4 x Analog Stereo + 4 x AES sources
  • • LED level meter
  • • Phase indicator
  • • Dot Matrix readout identifies selected source
  • • 5 Speaker full range monitor
  • • Line level analog output of selected source
  • • Front panel normalled headset jack (speakers mute when headset plugged in)
  • • External mute function
  • • 75 and 110 Ohm AES inputs
  • • Connections on pluggable screw terminals (analog and balanced AES) and BNC for unbalanced AES

Details

  • DIGITAL
  • • Input Voltage: 0.2-7V p-p
  • • Input Impedance: 110 Ohm, balanced and 75 Ohm, unbalanced
  • • Sampling Frequency Range: 30kHz to 50kHz
  • • Meter Level: 0VU = -20dBFS (or specify when ordering)

  • ANALOG
  • • Input Impedance: >20K Ohm balanced
  • • Input Level: +24 dBu max
  • • Meter Level: 0VU = +4dBu (or specify when ordering)

  • SDI
  • • Input Level: 0.8 Vp-p (typical)
  • • Input Impedance: 75 Ohm
  • • Output Level: 0.8 Vp-p
  • • Output Impedance: 75 Ohm
  • • Data Rate (Demux-4): 270-1485-2970 Mbps

  • GENERAL
  • • Power Requirements: 115V AC/60Hz 25VA, or 230V AC/50Hz
  • • Dimensions: 19 in. wide x 13/4 in. high x 103/4 in. deep (483mm x 44mm x 273 mm)
  • • Weight: 4.5kg (10 lbs)
  • • Open Collector Output: 10 Ohm 24V 25 mA MAX

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

My Cart

You have 0 item in your shopping cart.

Compare Products

You have no items to compare.

Contact us

Email: sales@ward-beck.com

Phone: 800 771 2556

Address: 945 Middlefield Road, Unit 9, Toronto, ON, M1V 5E1, Canada.

Feedback

We want to hear from you.

Give us your feedback!

View Customer Service for quick answers to common questions regarding shipping, RMAs, etc.

Follow us on