You're currently on:

POD14B Three Quarter

Double click on above image to view full picture

Zoom Out
Zoom In
SKU: POD14B

[POD14B] Dual Analog-to-AES/EBU Digital Audio Converter - 75 & 110 Ohm - 32kHz to 192kHz Sampling - 1 Balanced & 1 Unbalanced Audio In

Special Price US$895.00

Availability: In stock

OR

Details

POD14B is a dual AES/EBU analog to digital audio converter. This unit comes ready for use in 75 Ohm or 110 Ohm installations. POD14B can generate digital audio signals at sampling rates of 32, 44.1, 48, 96 and 192 kHz using its internal oscillator. Alternatively the sampling rate of the digital output signals may be referenced to an external source.

Front panel controls and tallies include a power switch with LED tally, a momentary step switch and LED indicators to cycle through the internally generated sample rates from 32 to 192 kHz. Two LEDs indicate whether the external or internal reference is used. The external reference signal has precedence over the internally generated reference signal. As soon as an external reference signal is detected POD14B will automatically switch to it. Coarse gain controls for input 1 are also available on the front panel.

Connections to the POD14B are made on the rear panel. Input 1 accepts unbalanced analog signals via standard RCA connectors. Input 2 accepts balanced analog signals via 3-pin Phoenix pluggable connectors. Connections to the digital reference may be made by either 75 Ohm BNC or 110 Ohm Phoenix 3-pin pluggable connectors. Both the 75 Ohm and 110 Ohm connections of each output may be used in parallel. Fine level trim controls for the analog input signal are located adjacent to the corresponding input connectors. The AC power receptacle and fuse are also located on the rear panel.

Details

  • • dual AES/EBU analog to digital audio converter comes ready for use in 75 Ohm or 110 Ohm installations
  • • generates digital audio signals at sampling rates of 32, 44.1, 48, 96 and 192 kHz using its internal oscillator
  • • sampling rate of the digital output signals may be referenced to an external source
  • • Front panel controls and tallies: momentary step switch and LED indicators to select sample rates from 32 to 192 kHz
  • • external or internal reference LED indicators
  • • external sampling rate reference signal has precedence
  • • Connections are made on the rear panel
  • • Input 1 accepts unbalanced analog signals via standard RCA connectors.
  • • Input 2 accepts balanced analog signals via 3-pin Phoenix pluggable connectors.
  • • Both the 75 Ohm and 110 Ohm connections of each output may be used in parallel.
  • • Fine level trim controls for the analog input signal are located adjacent to the corresponding input connectors.
  • • The AC power receptacle and fuse are also located on the rear panel.

Details

  • DIGITAL REFERENCE INPUT
  • • Input Impedance: 75 Ohm or 110 Ohm
  • • Input Level: 0.2-7 Vpp
  • • Sampling Frequency Range: 32kHz to 192kHz

  • ANALOG AUDIO INPUT
  • • Converter 1:
  • • Input Impedance: 47 kOhm unbalanced
  • • Maximum Input: +14dB
  • • Frequency Response: +0.01/-0.26dB, 20Hz – 20kHz
  • • Converter 2:
  • • Input 2 Impedance: 24 kOhm balanced
  • • Maximum Input: +24dBu
  • • Frequency Response: ± 0.1dB, 20Hz - 20kHz

  • DIGITAL AUDIO OUTPUT
  • • Resolution: 24 bits
  • • Output Standard: AES/EBU 75 Ohm unbalanced and 110 Ohm balanced
  • • External Sampling Frequency: 32kHz to 192kHz
  • • Internal Sampling Frequency: Selectable 32, 44.1, 48, 96 and 192kHz
  • • Jitter: less than 5ns
  • • Level: 1V p-p terminated for 75 Ohm or3 V p-p terminated for 110 Ohm
  • • Noise: better than -110 dBFS, 20Hz to 20kHz Typical unweighted
  • • Total Harmonic Distortion + Noise: better than 0.02%

  • GENERAL
  • • Power Requirements: 100-240 VAC, 50-60Hz
  • • Dimensions: 8.69 in. wide x 1.73 in. high x 7.0 in. deep (221mm x 44mm x 178 mm)
  • • Weight : 3.01 lbs (1.37 kg)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

My Cart

You have 0 item in your shopping cart.

Compare Products

You have no items to compare.

Contact us

Email: sales@ward-beck.com

Phone: 800 771 2556

Address: 945 Middlefield Road, Unit 9, Toronto, ON, M1V 5E1, Canada.

Feedback

We want to hear from you.

Give us your feedback!

View Customer Service for quick answers to common questions regarding shipping, RMAs, etc.

Follow us on