You're currently on:

75 to 110 in 1.75 inches: Introducing our new series of high density impedance panels

Our IMP balun series (75 to 110 or 110 to 75 Ohm converters) are upgraded and are now offered at higher densities for the XLR to BNC models. Priced at only $37.50 per slot, these panels offer incredible value for broadcast installations and systems integrators.

If you previously used our IMP lineup, you will notice that we have introduced the higher density IMP16M, IMP-16F and IMP-8M/8 to replace the IMP12, IMP12A and IMP12B models. The new IMP16 lineup will give you the same high quality performance while allowing you to conserve much-needed rack space.

Need a 10dB loss pad in the female XLR versions? These can be factory added at $7.50 per slot (check out IMP-1F/10, IMP-16F/10 and IMP-8M8F/10 for specs). Our in-line IMP-1M and IMP-1F are also available at $37.50 per unit with a similar charge of $7.50 to add the 10 dB loss pad to the IMP-1F.

The highest density IMP-20 series comes complete with a full set of 3-pin pluggable screw terminals. Ease of installation and ability to use circuits as 75 to 110 or 110 to 75 Ohm converters makes the IMP-20 series an installers dream. No soldering of connectors needed; just strip and terminate in the rugged 3-pin screw terminals, plug them in and you're done!

Our IMP panels are available from our distributors worldwide. Find a dealer near you or email sales@ward-beck.com.

Below is a chart to help you select the IMP product that best suits your application.

Leave a Reply
My Cart

You have 0 item in your shopping cart.

Compare Products

You have no items to compare.

Contact us

Email: sales@ward-beck.com

Phone: 800 771 2556

Address: 945 Middlefield Road, Unit 9, Toronto, ON, M1V 5E1, Canada.

Feedback

We want to hear from you.

Give us your feedback!

View Customer Service for quick answers to common questions regarding shipping, RMAs, etc.

Follow us on