You're currently on:

Monthly Archives: June 2015

  • Making Match-ic! Production pictures of our new microAMP and microMatch

    We are busy getting the metalwork together for our microAMP/110, microAMP/75 and microMATCH from our micro lineup of products. Time to build some! This is a bit of walk-through of our design and production process for creating these products.

    Continue reading

  • Ward-Beck Systems CADsoft Eagle Open Audio Product library growing

    A new Ward-Beck Systems CADsoft Eagle Open Audio Product library is growing rapidly.  As customers are sending in designs we can now design and arrange systems with much greater precision and accuracy.

    CADsoft is a CAD design suite capable of quick interconnect and error detection.

    A public library will be soon available!

    Screenshot 2015-06-23 13.44.52 Screenshot 2015-06-23 13.45.00 Screenshot 2015-06-23 13.45.51 Screenshot 2015-06-23 13.46.12 Screenshot 2015-06-23 13.27.35 Screenshot 2015-06-23 13.55.22

  • Big VU meters on display

    Our BigVU meters were on display at the 2015 MMVAs last night, on the side of Dome Productions' Pacific Truck.


    For more information on the bigVU meters, and how to preorder them, please fill out the form here, or watch out for order information coming soon at!

  • TOMS Workshop - Happening Tomorrow!

    Toronto Modular Synth Workshop the inaugural event is happing tomorrow hosted by the fine people over at 2Egress Sound and Design.   There will be performances from local talent at the first event.  There will be there sharing of knowledge from leading professionals within the city.  There will be the opportunity to trade some Eurorack modules, and there will be some talks by special guests and classes by professional tradesmen related to Eurorack and the music industry.

    This is going to be a great event!

    Screen Shot 2015-06-19 at 2.26.53 PM

  • Analog Audio - How does it work?

    Electron microscope slow-motion video of vinyl LP shows the inner workings of record players, and how they make tiny grooves and bumps into audio.  Enjoy!

  • Canada Music Week Visitor: GGGarth Richardson

    Garth Richardson at Ward-Beck Systems

    During Canada Music Week, producer / engineer and Ward-Beck Systems console enthusiast Garth Richardson came to us with an upgrade request. His Ward-Beck Systems L3204 console, formerly owned by the renown Kill Bennedy,  needed more gain on the direct outs.
    Bill Kennedy - Ward-Beck Systems L3204 Mixing console
    Garth's attention to gain structure lead him to need 4dB more from the WBS-L_M470A direct line output, factory set to 0dB relative to -15dB in hand position.  After a visit at the factory we came up with a solution tailored to fit the M470A module.

    Introducing the WBS-L-GGGain add on for the
    WBS-L-M470 microphone pre-amp modules. 
    Ward-Beck Systems - GGGain designed for Garth Richardson

    The WBS-L-GGGain adds 4dB of gain to only the direct out.  It was important not to throw the busses out of alignment.  By replacing the R104 and R105, the use of a WBS Legacy inspired Booster amplifier design, the task is accomplished preserving the character of the channel strip Garth enjoys.  The design is very similar to that used within the M470 Mic pre-amp fader receiver.

    Ward-Beck systems M470 output schematic

    In order to be customer installed, a hole must be drilled into the PCB; luckily a spot without traces was nearby.  The WBS-L-GGGain has (7) leads that easily connect to the PCB for line in/out and power.  Ward-Beck Systems - GGGain designed for Garth Richardson overlaid on an M470 microphone pre-ampThe first production run will be this month.  Once they are test department approved, they will be install ready.  Several extra GGGain modules will be produced and made available in our new online marketplace.  We look forward to working on projects like this one for Garth and welcome others like it.   Ward-Beck Systems - First By Design.  

  • Modification of IMP-16 Impedance Panel at Customer Request

    One of our customers requested a modification of our standard IMP-8M8F impedance panel, containing 8 BNC to XLR female baluns and 8 BNC to XLR male baluns, into a custom panel of 10 BNC to XLR male baluns and 6 BNC to XLR female baluns (IMP-10M6F). At Ward-Beck's our in-house production facility and metal shop means that we can absolutely accommodate custom requests like these for our clients. Off we set to work!

    We started with a standard IMP-8M8F panel:

    In order to modify the IMP-8M8F into custom 10-male 6-female panel, we had to take two of the female (BNC to XLRF) assemblies, and replace them with two extra male (BNC to XLRM assemblies). We happened to have two male baluns assembled in stock to start from, with one slight issue.

    Finally, after the modifications were complete, we had our custom IMP-10M6F panel!

    A comparison of the two:

    We think it came out great, and hope that the customer gets a lot of use out it!

    Don't hesitate to contact Ward-Beck Systems if you need a custom modification of one of our existing product. With an in-house Engineering, Production and Metal House team, we are ready to give your custom needs our best shot!

    Send a request to if you have a custom request!

7 Item(s)

My Cart

You have 0 item in your shopping cart.

Compare Products

You have no items to compare.

Contact us


Phone: 800 771 2556

Address: 945 Middlefield Road, Unit 9, Toronto, ON, M1V 5E1, Canada.


We want to hear from you.

Give us your feedback!

View Customer Service for quick answers to common questions regarding shipping, RMAs, etc.

Follow us on