You're currently on:

Ward-Beck Systems Blog

  • Counting the days 'til NAB 2014!!

    Six more sleeps till the "Big Day" when exhibits for NAB 2014 opens on April 7. Are you going to be there?

    Above is a sneak preview of the new products we are excited to be introducing at the show! Please drop by our booth N1202 to meet and greet and see for yourself.

    Onsite staff:

    Kevin Lyver
    Ali Sharifan
    Wayne Young

    and, if you want to reminisce about the good old days...

    Eugene Johnson the senior citizen will be there as well :)

    We will also have products and representatives of our partners on display: DK Technologies,CP Cases, Replay, Soloshot, Vela, Technalogix, Rushworks, Vanco, Panasonic Professional Imaging and more!

    Hope to see you all there. Let's get this show on the road, people!

  • The Underbelly of Show Business (Quite Literally)

    (Part 2 of Getting Ready for the Big Show)

    NAB crunchtime is fast approaching and stuff is coming together in time for the big reveal at Las Vegas. Last week, we showed off some of shiny stuff we've been working on. This week, let's get into the down and dirty side of how we get said shiny things to actually work.

    Have you ever wondered just how much wiring and cabling goes into making all those pretty lights dance around on screen? If you're anything like us at Ward-Beck, of course you have. Well, they do say a picture speaks a thousand words. So, here's five thousand words worth of cabling ;)





    What are your plans for NAB? Just looking around, or got any special displays you're scoping out? Let us know in the comments, or check us out at Booth# N1202 and lets us know in person ;) See you there from April 7th-10th at the Las Vegas Convention center!

  • Throwback Tuesday: Delving deeper into Ward-Beck’s history with the Olympics

    With the conclusion of the Sochi 2014 Winter Olympics and the entertainment networks returning to a more "normal" process after taking over the world by storm, it's a good time to delve deeper into Ward-Beck Systems' history of supplying equipment for the Games. 1976 was the first year that Ward-Beck provided equipment for use at an Olympic event. This began our long association of designing and manufacturing equipment for use at both Summer and Winter games.

    More specifically, the WBS model 75046 mobile audio console, designed to CBC's specifications, were used at the 1976 Montreal Games in CBC's Olympics vans. Four of these units were built for the event and installed in mobile trucks. Post Olympics, these consoles were used to broadcast Hockey Night in Canada and many other sporting events. Below, you can see the M1002 which was mentioned in our previous post about the Olympics. Fifty-five of these babies were used by CBC and ABC in their coverage of the 1976 Summer and Winter Games, and proved to be a great hit. (Fun fact: Both the Winter and Summer Olympics were held in the same year every four years, until the IOC decided at the 1986 Session in Lausanne to hold the Winter Games two years apart from the Summer Games, and this new system was put into effect in 1992.)

    Ward-Beck Systems has also supplied Olympics equipment to several major networks in the United States. At the 1980 Lake Placid Winter Olympics, ABC used a WBS matrix intercom system in its mobile units. This system allowed point to point and point to multi-point communication. Engineering alone had a 48 by 48 matrix, which was no small feat for the technology of the time. CBS was a big purchaser of compact WBS consoles for sporting events, such as the 24-channel WBS 74062, designed for TV mobile applications. NBC also got in on the game, no pun intended, with some large purchases for the 1988 Summer Olympics in Seoul. These consoles were refurbished at the Ward-Beck factory in Toronto and were redeployed for use at the 1992 Summer Olympics in Barcelona.

    (Above: he console from the 1984 Olympics.  This console is currently in Hamilton Ontario. Photography courtesy of Anthony Kuzub of APK Audio.)

    At an event like the Olympics, where versatility and dependability as well as high quality is crucial, Ward-Beck products have excelled. Did you know that at the 1988 Winter Games in Calgary, audio mixer Norm Mallalieu mixed the feed from the entire bobsleigh run with a 32-channel WBS console? It’s true. Another memorable Olympics product is the M460LA input channel strip which was based on the M460 design. As the name might tip you off, this channel strip was designed specifically for use in the 1984 summer games in Los Angeles. Offering a 4 band parametric equalizer, these units are still sought after today for audio recording/production and are in use in sound studios worldwide.

    Getting a little closer to home, our products were no slouches at the 2010 Vancouver Games. We supplied products for the CTV Olympics Broadcast facilities. The entire CTV broadcast centre was constructed in a warehouse near our Toronto plant for pregame training, before being shipped off to the Games in Vancouver. If you click on this article on organizing the 2010 Vancouver Games, you will see Robert Miles, who was in charge of designing the infrastructure for the CTV Olympics coverage for Vancouver 2010, making adjustments to an AMS16-2AM, our high-quality Multi-Channel Audio Monitor.

    At Sochi 2014, there is no doubt the Ward-Beck products supplied to CBC, NBC and others were still going strong. It is humbling to think that the equipment manufactured at our facility has played a part in helping to broadcast major sporting events like the Olympics, Super Bowl and more all around the world.

    (Thank you to Eugene and Colleen for looking this over and adding more details, and to Gerry Bell for all his Olympics stories that contributed to this article.)

  • Getting ready for the big show: Part 1

    At Ward-Beck, we're busy gearing up for showtime. It’s less than four weeks until the 2014 NAB Show starts, and we are excited to show you some of the things that we've been working on! Here's a brief sneak preview of a few of the things we’re putting together:

    We’re excited to let you know all about the new stuff we’ll be showing off at NAB. Make sure you come check us out at Booth# N1202. Ward-Beck will be exhibiting from April 7th-10th at the Las Vegas Convention center.  We hope to see you there!

  • We have split millions of signals - The Evolution of a Distribution Amplifier

     

    Pictured above: The Ward-Beck distribution amplifier, from its original design in 1971, to the current one.

    As legend goes, Ron Ward and Rodger Beck started experimenting with solid state amplifiers while still working for McCurdy Radio Industries. Mr. George McCurdy allegedly forbade them on pain of dismissal to give up this foolish notion and stop wasting time with these "new fangled transistors" which were only good enough for cheap "made in Japan" radios. Professional equipment used vacuum tubes and that was what was used in in the McCurdy product line.

    Ward and Beck persevered and so was born the precursor to one of the first products designed and manufactured by Ward-Beck Systems Ltd. after these renegades broke away from MRI and formed their own company. Christened the M600, the very first production models used germanium transistors. Later models used silicon transistors. The M600 was a 50 to 70 dB gain brick that could be used as a microphone preamplifier or a line/distribution amplifier. Equipped with both input and output transformers and loads of headroom, this was a truly versatile universal amplifier built like the proverbial outhouse. Eight units and a 48 volt power supply were accommodated in a 2 RU frame.

    Continue reading

  • 600 Ohms: Is it neccessary?

    About one year ago we stopped producing 600 Ohm output devices in our analog audio product line. We standardized on 60 Ohm devices in our distribution amplifier line. This simplifies our SKU's and benefits the user since they gain headroom and reduce power consumption. The 60 Ohm output impedance provides sufficient isolation between the splits of a distribution amplifier.

    There are still users out there that seek devices with a 600 Ohm output impedance. A little research on the internet (that great source of information, mis-information and confusion) served to inform me that the there is a great lack of understanding of how the 600 Ohm standard came about and why today, it is no longer a requirement.

    m8204a alone
    Pictured above: The M8204A - a 600 Ohm analog audio distribution amplifier that we recently discontinued.  

    The M8204A has been replaced with the current M8204.

    I did find this informative paper by Frank McClatchie that explains everything very well. Thank you Frank! See the internet can be informative... avoid the discussion groups where they attribute "sound coloration" and "sheen" and all sorts of sound qualities and effects to the impedance of the devices which carry the audio signal.

    THE 600 OHM AUDIO STANDARD, WHERE DID IT GO?
    By: Frank McClatchie

    The standard for audio was born out of the radio industries need to set a standard, and has always been related to 600 Ohms impedance with the level measured in dBm which refers to Decibel milli-Watts of power delivered to the "load". One milli-Watt = 0dBm. However in recent years the audio industry has changed it method of delivering audio power.

    Continue reading

  • Watching the Olympics in the US

    Ward-Beck Systems has supplied equipment to Olympic games broadcasters since the summer games in Montreal in 1976. That year a large contingent of audio consoles and intercom systems that would later be integrated in to the CBC network country wide were ordered by the CBC.

    M1002

    The M1002 a ten channel portable console, for venue production, was designed to specifications issued by CBC's ORTO. Later this console was re-issued as the T1202 with inputs increased to twelve. We dubbed this a transportable console since the weight as described by our US sales person, Bill McFadden, was "heavier than a dead priest" and required two persons to move. Many of these M1002 and T1202 consoles are still doing yeoman's work in music production today.

    2014 and many Olympic games later, watching the Olympic coverage from Sochi on NBC while in Florida, what a different experience for a Canadian. You get a totally different perspective on the games. In Canada we are so used to be able to switch between local and international coverage. NBC, CBC and BBC coverage is readily available on cable and satellite services.

    Regardless, the NBC production is top-notch with great video and crystal clear audio. One can only marvel at extent of technological progress and innovation that our industry has has gone through in a relatively short 38 years.

    Thanks to all the athletes participating, congratulations to all the winners and to Canada's team, "Go Canada Go!"

  • We've been busy at WBS

    2013 saw our move to new premises at 945 Middlefield Road in the Steeles Avenue and Markham Road area of Toronto.

    In 2013, we celebrated 46 years in business and the 20th year of ownership by Colleen and Eugene Johnson, a truly remarkable feat in the history of Canadian broadcast manufacturers.

    We have been busy making improvements to our designs to provide greater versatility and cost savings to our clients. Products where improvements have been made include the IMP Series (AES impedance converter baluns), PODS Series, AMS Audio Monitor Series and Demuxer Series.

    Improvements to PODs

    POD10A ThreeQuarter

    All PODs are going through a migration to SMT designs. This transition allows us to update designs and to control costs. Pricing of POD products remain unchanged. We have added more versatility to AES switching with the replacement of POD10 by POD10A (in both 75 and 110 Ohm versions) which now offers an eight by one or dual four by one switchers in the same package at the same cost. POD12A replaces POD12 offering an eight output AES distribution amplifier or dual four output distribution amplifiers with SRC (sample rate conversion).

    IMP Series

    IMP-1F

    A slicked up design for the entire product line allows us to drastically reduce the price of the single in-line converters (IMP-1F and IMP-1M). The new design also allows us to increase the panelized versions of the BNC to XLR from 12 circuits in a 1 RU rack mount panel to 16 circuits at the same price! Now available are the following models:

    IMP-1F - providing a single 110 Ohm XLR-F connector to 75 Ohm, BNC connector
    IMP-1M - providing a single 75 Ohm BNC connector to 110 Ohm XLR-M connector
    IMP-16F - providing sixteen 110 Ohm XLR-F connectors to 75 Ohm, BNC connectors in 1RU
    IMP-16M - providing sixteen 75 Ohm, BNC connectors to 110 Ohm XLR-M connectors in 1RU
    IMP-8M8F - providing eight each of XLR-M and XLR-F to BNC connectors in 1RU
    IMP-20 - providing 20 75 Ohm BNC to110 Ohm Phoenix 3-pin pluggable connectors in 1RU
    IMP-20A - providing 20 75 Ohm BNC to110 Ohm Phoenix 3-pin pluggable connectors located on the same panel surface in 2RU

    IMP-8M8F XLR

    All impedance circuits with XLR-F and Phoenix connectors can be factory configured to add a 10 dB loss pad. This is desirable when an AES signal will be distributed using an analog video amplifier.

    DEMUX 4

    A new 3G dual input Demuxer can now be added to all our monitor and metering equipment. DEMUX 4 will also be available in a "throw down" package and as a stand-alone POD. Keep watching for news.

    What else?...

    Come visit us at NAB2014 Booth N1202 to see what else is happening at WBS. MADI monitoring, AVB...hmmm

  • Hardware/Software Engineer

    We are looking for a hardware/software design engineer. Your duties will include designing, building and testing equipment used in radio and television broadcasting facilities. You will be involved in all stages of development of new products.

    Your responsibilities will include:
    • Board level design
    • Circuit development and testing
    • High speed transmission development and testing
    • Design and develop hardware using VHDL, Verilog, C, C++ and Assembler programming

    Knowledge of the following development tools is essential:
    • Altium Designer
    • AutoCad
    • PCad
    • Image Craft for Atmel
    • Quartus II for Altera
    • Visual DSP for Sharc
    • MPLAB for PIC Microcontrollers

    Qualifications for this position:
    • A degree in Electrical/Computer Engineering or Computer Science
    • Accrued related experience
    • Be results oriented, self-motivated, and a team player
    • Good communications skills
    • Strong problem solving and trouble shooting skills

    Experience in the following areas is essential:
    • Programming in an embedded environment
    • CAN bus protocol
    • Structured, object oriented design and programming techniques
    • Data structures, device design and embedded real-time applications
    • TCP/IP, Ethernet, Hardware drive

    send resume to careers@ward-beck.com

  • 32ME - High Density Meters - Shipping Now!

    Ward-Becks' award winning 32 channel Meter panel 32ME is Shipping Now!

    Three models are available.  32ME-AES, 32ME-SDI, and 32ME-MADI.  At $2595.00, $3295.00, and $3495.00 respectively.  32ME overview available for downloading here.

    Contact us to pre order yours today!

    32ME-MADI Front

Items 181 to 190 of 209 total

Page:
  1. 1
  2. ...
  3. 17
  4. 18
  5. 19
  6. 20
  7. 21
My Cart

You have 0 item in your shopping cart.

Compare Products

You have no items to compare.

Contact us

Email: sales@ward-beck.com

Phone: 800 771 2556

Address: 945 Middlefield Road, Unit 9, Toronto, ON, M1V 5E1, Canada.

Feedback

We want to hear from you.

Give us your feedback!

View Customer Service for quick answers to common questions regarding shipping, RMAs, etc.

Follow us on